Model No: HV-3G-HD/SDI <<
Introduction:

This KVideo miniature and high quality HXS-3G HD/SDI fiber optical transmission system is pathological test compliance, with built in EQ and reclocking features. It works with either singlemode or multimode fiber cable.

 

  • Product description
  • Gallery

This miniature and high quality 3G HD/SDI fiber optical transmission system is pathological test compliance, with built in EQ and reclocking features. It works with either singlemode or multimode fiber cable. Received Optical Power levels. It provides critical system diagnostic information at a glance without a need for additional test equipment.

3G HD/SDI fiber optical transmission system uses its own power supply or any DC voltage from 5 to 16 volt. By using XLR 4 PIN with latch locking mechanism, it

It supports SMPTE 424M/297M (1080p — 2.97Gbps); SMPTE 292M/297M (HDTV — 1.485Gbps); SMPTE 259M/297M (SDTV — 270/360Mbps).

These tiny transmitter and receiver modules can be deployed almost anywhere. The modules include LED indicators to display Power On, HD/SDI signal presence and

can avoid unwanted power interruption. This connection also includes provisions for SNMP monitoring.

APPLICATIONS

l   Sports tele-production for Golf,skiing, racing, etc.

l   Remote camera links

l   Cross-town fiber links

l   Cross-campus production

l   Pre-installed fiber venues

l   OB Van

KEY FEATURES

l   Portable, lightweight units

l   Reliable, efficient

l   Quick, easy installation

l   LED indicators show you:

Power on

HD/SDI data presence

RX Optical power levels

l   19.4 Mbps to 3 Gbps

l   SMPTE 424M/297M compliant

l   SMPTE 292M/259M/297M compatible

l   Supports embedded audio

l   Up to 30 km

l   Low system jitter

l   Power from 5-16 VDC

l   Digital diagnostic function

l   High durability design

l   Class 1 FDA and IEC60825-1 Laser

l   Safety Compliant

l   Pathological test compliance

 

 

 

 

Mechanical

 

 
Length 3.2 in. (8.13 mm)
Width 0.65 in. (1.65 mm)
Height 0.75 in. (1.91 mm)
Weight, Each End 4 oz (150 g)
Indicators Power, signal, link, optical power
 

Electrical

 
Input Voltage 5~16 VDC
Power Connector XLR 4Pin  (with latch locking mechanism)
Power Consumption, Each End (typ.) 600mW
 

Environmental 

 
Operating Temperature -25° C to +55°C
Relative Humidity 0 to 95%, non-condensing
 

Video

 
Transmission Method Digital
Input Level 800 mV (peak to peak)
Input Impedance 75 ohms
Coax Equalization@270 Mbps 350m
                       @1.485 Gbps 140m
@ 2.97 Gbps 50m*
Output Impedance 75 ohms
Bit-Error Rate (@ -20 dBm) 10-11
Jitter (pathological data pattern) < 120 ps
Rise/Fall Times < 120 ps
* –  Typical equalized length of Belden 1694A cable: 120m at 2.97Gb/s, 200m at 1.485Gb/s, and 350m at 270Mb/s.
 

Transmission

 
Operating Wavelength 1310nm standard, (1550nm DFB or 18 Ch. 1270~1610nm CWDM

upon request)

Video Connector In/Out BNC
Optical Connector ST (standard)
Transmitter Output -6~0 dBm (0~+3 dBm optional)
Receiver Sensitivity -20 dBm
Link Margin/Distance 13 dB/5km@3G for singlemode;

0.3km for multimode

Fiber Type Single mode or multimode
Get Discounted Quote
Get a Quote
X

STAY CONNECTED

Subscribe Us for best price

  • STAY UPDATED